|
Eliminates
Waste Generated Hazards
SURFASOLVE™
technology can virtually eliminate
hazardous waste generation produced
during composite resin cleaning
operations when used properly. SURFASOLVE™
never stops working in the liquid
form and therefore will not need to
be disposed of, unlike conventional
solvents such as acetones. Polymers
being cleaned in SURFASOLVE™
will fall out and can be fully
recovered as a solid material later
on.
Not
creating hazardous waste greatly
reduces costs and the regulatory
burdens that can be very costly if
not followed correctly. Hazardous
waste has to be stored and kept
until picked up for proper disposal,
greatly increasing the risk of an
explosion resulting in fire. There
are no flammability or combustible
issues to deal with when using SURFASOLVE™
technology.
SURFASOLVE™
flashes above 210˚
F which is well above the 140˚ F
threshold to be considered
RCRA waste by definition of
flammability. There are no
HAP's (Hazardous Air Pollutants) in
any
SURFASOLVE™
formulas and all of the ingredients
are considered fully biodegradable.
Disposal Considerations
It is highly recommended to profile
any waste material collected from
SURFASOLVE™ containers or
work stations to consider it
legal status as a waste. In most
cases after profiling the
waste material one time will be
considered sufficient so long as the
process does not change. Once this
waste is profiled it will most
likely fall into a solid waste
category.
Please be careful to never throw any
material down the drain, on the
ground or in a dumpster. Make sure
all wastes are handled according to
all applicable federal, state and
local laws. |
