| |
|
Cleaning
with SurfaSolve Tool Cleaner: |
| |
Cleaning Rollers |
| |
|
| |
Cleaning Tools, Scissors, Squeegees
etc. |
| |
|
|
|
Cleaning Hands |
| |
|
| |
|
Recycling: |
|
Never Throw away liquid SurfaSolve, it is fully recyclable.
For recycling use the flock tank to clean the old material
and separate glass fibers out. Refer to Recycling
SurfaSolve |
| |
|
Avoid The Following: |
|
•
Avoid cleaning gel
coat and putties in workstations that are used for cleaning
resin. Use a different workstation setup for gel coat and
putties. DO NOT ADD WATER TO SURFASOLVE! |
| |
| |
| |
|
 |
|
SurfaSolve
Tool Cleaner is used to clean rollers, hands
and tools during lamination. SurfaSolve Tool
Cleaner will completely replace acetone and
other solvents. It never stops working in the
liquid form
 and is easily recycled using our
work and flock stations. When used correctly
SurfaSolve can eliminate hazardous waste
generation and increase employee safety. SurfaSolve is 100% biodegradable, contains no
HAPS, is non-flammable, non-combustible and
non-DOT regulated SurfaSolve was designed
to polymerize with the resin and acts as a
plasticizer in it. SurfaSolve Tool Cleaner is
compatible in the curing of the resin to prevent
potential uncured laminates and blisters in gel
coat if employees get small amount in the
laminate. |
|
Buy Now |
| |
|
|
|
How The Material Is Used: |
|
SurfaSolve Tool
Cleaner must be used with our workstations to
utilize its maximum efficiency. SurfaSolve can
also be used in small containers and then
brought back to the workstation or more
preferably the floc station after temporary use.
The reason SurfaSolve must be used in
conjunction with our workstations is to provide
a large volume of material that allows the resin
to settle out without consuming the SurfaSolve
itself and then gelling. Remember the SurfaSolve
will act as a plasticizer and therefore cure
with the resin if there is no sufficient volume
of SurfaSolve present.
Because the resin is denser than the
SurfaSolve and falls, roller heads touching the
bottom of a small container will lock up.
Workstations have been designed with a grid
plate eight inches from the bottom to keep the
rollers off the bottom were the resin falls and
gels. There are brushes on the grid plate to
help remove stubborn materials from tools and
gloves. |
| |
|
|
| |
|
Features &
Benefits: |
|
•
Excellent solvency on all resin
systems |
|
•
Highly effective. |
|
•
Residue from tools will not
affect laminates. |
|
•
No moving parts |
|
•
No heat required (low temp use) |
|
•
No HAPS, Trace VOC. |
|
•
Non-flammable |
|
|
|
Features &
Benefits: |
|
•
Very slow evaporation |
|
•
Fully recoverable many times |
|
•
Large reduction in waste generated |
|
•
SurfaSolve Can outlast 10-15 drums of acetone. |
|
•
Increased productivity. |
|
•
Product never stops working. |
| |
|
Safety: |
|
•
100% Biodegradable. |
|
•
No skin absorption hazards found. |
|
•
Low Toxicity. |
|
