SurfaSolve Workstations

It's necessary to use a specially designed work station to effectively use SURFASOLVE™ Tool Cleaner. A sufficient amount of SURFASOLVE™ is needed to allow resin to "fall apart" and collect at the bottom. It is imperative not to use 5 gallon pails or small containers for long periods of use with SURFASOLVE™. If it is necessary to use the SURFASOLVE™ in a small container or pail it must be put back into the main floc tank for cleaning after a day or two. Once the dirty SURFASOLVE™ is put back into the main floc tank it will self clean and be ready for use once again.

Workstations contain no moving parts leaving no possibility for a mechanical break down. This also makes cleaning  simple and hassle free.  When resin is cleaned in the workstation  the SURFASOLVE™ Tool Cleaner allows the resin to continue its cure and polymerize into a solid particle. These particles are very small and accumulate at the bottom of a large floc. The workstation should be cleaned when the floc level reaches about a quarter of the way up from the bottom. This is easy to see, there is a distinct separation layer between the liquid SURFASOLVE™ and the collected resin floc. The SURFASOLVE™ is then recycled using a filter to collect the resin floc and glass fibers over a collection drum.

We emphasize the simplicity of the workstation in its ease of use. We have found that it is completely unnecessary to have any moving parts that will breakdown and constantly need cleaning. This leaves the maintenance department more time for important tasks.
A technical sales representative will help determine how many work stations will be necessary for your particular operation for maximum efficiency.
 

**Information Provided by 21st Century Composites**